Technical Data For Pcd7.L630 - SBC PCD7.L630 Instruction Manual

Saia-Burgess Controls AG
2.1.1 Technical data for PCD7.L630
Room temperature sensor
Pin allocation for PCD7.L630
Signal
Temperature sensor
Pin allocation for connecting cable PCD7.L671
Colour
White
Black
Note
All information points can be read by the SBC S-Bus via a Room FBox or via regis-
ters independently of the application.
The use of an analogue room control unit must be indicated in the configuration.
See description of Config FBox or registers.
Manual for PCD7.L6xx room operator units │ D ocument 26-859 ENG07 │ 2 015-06-04
Terminal Description
S, GND Temperature sensor NTC 10 kΩ,
measurement range 0...40 °C.
Description
Terminal
Temperature/presence sensor
S
Ground for the temperature sensor
GND
Analogue room controller units
Technical data
2
2-4