Table of Contents
Advertisement
Saia-Burgess Controls AG
Function
Presence
Fan control
Light control
Blind control
Commissioning / configuration
The room control unit has its own configuration parameters, which can be queried
and changed with a certain key combination.
To activate the parameter mode, the defined combination of keys should be pressed
together for at least 1 second. The display will then switch to parameter mode. The
and
Manual for PCD7.L6xx room operator units │ D ocument 26-859 ENG07 │ 2 015-06-04
Description
The two function keys
change the operating mode manually to Comfort or Stand-
by/unused. The operating mode is shown on the display
for approx. 20 seconds. The person symbol outside the lit-
tle house indicates non-use; inside the house, it indicates
presence. After this, the display returns to the default view.
The fan setting is activated with the function key
display shows a fan symbol. The
now be used to set the fan speed manually.
Fan stopped
Fan step 1
Fan step 2
Fan step 3
Fan automatic
The PCD7.L60x room controllers can only switch the fan
to the desired step if this is allowed by the fan operating
window. See description of the associated configuration
parameters
The function key
ing control and to select the desired light group. Pressing
the same key several times selects all (ALL) or only one
light group (1...4), which can then be switched on and off
manually with the
See description of the associated configuration param-
eters.
The function key
control and to select the desired blind group. Pressing the
same key several times selects all (ALL) or only one blind
group (1...4), which can then be raised and lowered manu-
ally with the
See description of the associated configuration param-
eters.
keys can be used to change the parameter. If no key has been pressed
Digital room controller units
and
can be used to
and
A
is used to activate the menu for light-
and
keys.
is used to select the menu for blind
and
keys.
3
. The
keys can
3-19
Advertisement
Table of Contents
