Table of Contents
Advertisement
Saia-Burgess Controls AG
Function
Retain settings
Blind rotation
Number of light groups
Manual for PCD7.L6xx room operator units │ D ocument 26-859 ENG07 │ 2 015-06-04
Description
The settings for the fan and the set-point displacement
may be permanently applicable or only valid for the current
configuration step.
Retain settings:
Press and
keys together for at least 5 seconds.
The temperature and fan symbols will flash and status ON
will be displayed.
Settings are only valid for the current configuration step.
Press and
keys together for at least 5 seconds.
The temperature and fan symbols will flash and status
OFF will be displayed.
Factory setting: ON
The rotation function can be used to control venetian
blinds. When active, the rotation command is issued with
the
key.
Deactivate rotation function:
Press
and
keys together for at least 5 seconds.
On the display, the rotation symbol will flash and the status
text OFF will be displayed.
Activate rotation function:
Press
and
keys together for at least 5 seconds.
On the display, the rotation symbol will flash and the status
text ON will be displayed.
Factory setting: OFF
The lighting is controlled by group commands. The as-
signment of individual lights to groups is part of the room
controller configuration. This may differ according to the
communications interface, and is described in the relevant
section of this Manual.
The room control unit has no knowledge of the room
controller configuration. It is therefore necessaryto param-
eterise the number of supported light groups in the room
control unit separately.
Press
and
keys together for at least 5 seconds.
On the display, the light symbol flashes and the number of
light groups currently configured is shown. The
can be used to select the value 2, 4 or 8.
Factory setting: 2
Digital room controller units
key
3
3-16
Advertisement
Table of Contents
