Cables For Room Controllers And Room Control Units - SBC PCD7.L630 Instruction Manual

Saia-Burgess Controls AG
4

Cables for room controllers and room control units

PCD7.L670
Preconfigured cable to connect digital room control units to room controllers or
extension modules.
Room controller RC-Bus
PCD7.L60x, PCD7.L61x
Length
Plug connector
To fit:
Room control units:
Room controllers:
Extension modules:
PCD7.L671
Preconfigured cable to connect analogue room control units to room controllers.
Room controller analogue
input:
PCD7.L60x or PCD7.L61x
Length
Plug connector
To fit:
Room control units:
Room controllers:
Note:
The PCD7.L630 room temperature sensor is fitted with a 2-pole screw terminal.
A 2-core cable is sufficient to connect to it; if the PCD7.L671 cable is used,
the preconfigured connector is cut off, the insulation removed from the cable before
connecting it in the conventional way.
Manual for PCD7.L6xx room operator units │ D ocument 26-859 ENG07 │ 2 015-06-04
1
2
3
4
RJ9
10 m, 30 m, 50 m
RJ-9 / RJ-9
PCD7.L64x, PCD7.L661 and PCD7.L663
PCD7.L60x, PCD7.L61x
PCD7.L62x and PCD7.L650
PCD7.L671
S
P1
-
SV
R
10 m
RJ-11 / flex
PCD7.L631 and PCD7.L632
PCD7.L60x, PCD7.L61x
PCD7.L670-xx
10 m, 30 m, 50 m
RJ9
10 m
RJ11
Digital room controller units
4
3
Digital room control unit
PCD7.L64x, PCD7L66x
2
1
Temp. Sensor / Prensence button
Ground
Poti
Analogue room control
unit PCD7.L63x
Not use
Power Supply Poti
LED
Cables
3
4-1