Table of Contents
Advertisement
Saia-Burgess Controls AG
Function
Presence Sensor
Fan control
Note
All analogue inputs on the room controller can be read by the S-Bus via a Room
FBox or via registers independently of the application.
The use of a digital room control unit must be indicated in the configuration.
See description of Config FBox or registers.
Manual for PCD7.L6xx room operator units │ D ocument 26-859 ENG07 │ 2 015-06-04
Description
The presence sensor can be used to change the operating
mode manually to Comfort or Standby/unused. In Comfort
mode, the semi-transparent sensor lights up.
The fan selection switch can be used to set the fan speed
manually. The room controller can only switch to the
desired step if this is allowed by the fan operating window.
See description of Config FBox or registers (reg. 63, 64)
Digital room controller units
3
3-7
Advertisement
Table of Contents
