Removing The Pressure Switch - Whirlpool WFW94HEX Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover from the washer
(REMOVING THE DISPENSER DRAWER, TOP AND
CONSOLE ASSEMBLY for the procedure).
Pressure Switch

REMOVING THE PRESSURE SWITCH

4. Press and release the two wire connector
locking arms and pull the connector off the
pressure switch.
5. Pull the pressure hose off the pressure
switch fitting.
Wire Connector
6. Turn the pressure switch 90° in either direc-
tion, and align the key on the switch with
the slot in the chassis, then remove the
switch from the washer.
4-7
Pressure Switch
Pressure Hose