Removing The Eco Valve - Whirlpool WFW94HEX Technical Education

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the front panel, see ("REMOVING THE
DOOR SWITCH ASSEMBLY FRONT PANEL AND
BELLOWS")
Drain Pump Filter
4. Using a shallow pan to catch the water, un-
screw the filter from the drain pump, and
drain the water from the sump.

REMOVING THE ECO VALVE

Drain Pump
Rubber Isolators
5. Pull the pressure hose off the air trap that
is connected to the pump-to-tub/ECO valve
hose.
6. Loosen the clamps at both ends of the
pump-to-tub hose, and pull the hose/ECO
valve off the tub and drain pump.
REASSEMBLY NOTE: When you reconnect the
hoses, align their tab(s) with the marks on the
drain pump.
4-15
Clamp
Pump-To-Tub Hose
Clamp
ECO Valve