REMOVING THE PRESSURE SWITCH
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug washer or disconnect power.
2.
Turn off the water supply to the washer.
3.
Remove the top cover from the washer
(see page 4-2 for the procedure).
Pressure Switch
4-7
4.
Press and release the two wire connec-
tor locking arms and pull the connector
off the pressure switch.
5.
Pull the pressure hose off the pressure
switch fitting.
Wire Connector
Pressure Hose
6.
Turn the pressure switch 90° in a clock-
wise (CW) direction, and align the key
on the switch with the slot in the chassis,
then remove the switch from the washer.
Pressure Switch