Removing The Dispenser Drawer Top And Console Assembly - Whirlpool WFW94HEX Technical Education

REMOVING THE DISPENSER DRAWER, TOP AND
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. To Remove the dispenser drawer:
a) pull the drawer all the way out and
depress the tab labeled "push" to remove
drawer.
4. To remove the top:
a) Remove the three 1/4" screws from the
rear top cover of the washer.
Top Cover Screws
b) Pull back on the top.
CONSOLE ASSEMBLY
Dispenser Drawer
Release Tab
Tabs
5. To remove the console:
a) Remove the top.
b) Remove 2 screws at both ends on the top
of the console.
Remove These Screws
c) Remove 2 T25 Torx head on either side of
drawer opening.
Remove These Screws
d) Lift the top edge of the console and
unhook it from the holder tabs.
Tabs
4-2
View is top front
Console