Removing The Detergent Dispenser Assembly - Whirlpool WFW94HEX Technical Education

REMOVING THE DETERGENT DISPENSER ASSEMBLY

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover from the washer.
See "REMOVING THE DISPENSER DRAWER, TOP
AND CONSOLE ASSEMBLY" for the procedure).
Detergent Dispenser
4. Remove the console from the washer (see
step 5 "REMOVING THE DISPENSER DRAWER, TOP
AND CONSOLE ASSEMBLY" for the procedure).
5. Loosen the clamp and remove the water sup-
ply tube from the detergent dispenser.
Water Supply Hose
Vent Tube
6. Loosen the clamp and remove the tub-to-
dispenser vent tube from the dispenser.
7. Remove the detergent dispenser screws
from the front and top of the washer.
8. Lift the locking tabs and remove the two
wire connectors from the detergent dis-
penser motor terminals.
Terminal
Connectors Dispenser Motor
9. Remove 1 screw from the center support
bracket.
Remove this Screw
4-9
Support Bracket