Does A Message Appear Instructing You To Check The Staple Unit - Sharp MX-B455W Troubleshooting Manual

General Problems
STAPLING DOES NOT TAKE PLACE
?
Check
Does a message appear instructing
you to check the staple unit?
Does a message appear instructing
you to add staples?
Are there more sheets than can be
stapled at once?
Is a paper size that cannot be stapled
included in the print job?
Is the paper type setting of the tray
selected in the printer driver set to a
paper type that cannot be stapled?
THE STAPLING POSITION IS NOT CORRECT
?
Check
Is the stapling position setting
correctly?
PREVIEW IMAGES OR THUMBNAIL IMAGES DO
?
NOT APPEAR
Check
Are there a number of jobs waiting to
be executed?
!
Solution
■ Remove jammed staples.
► Maintenance (page 6)
■ Replace the staple cartridge.
Do not forget to replace the staple case.
► Maintenance (page 6)
■ For the maximum number of sheets that can be stapled, see "SPECIFICATIONS"
in Start Guide.
■ For paper sizes that can be stapled, see "SPECIFICATIONS" in Start Guide.
■ You must check the paper types that are set on the machine, and select a paper
tray that is set to paper* that can be used for staple printing.
Click the [Tray Status] button in [Paper Source] tab of the printer properties
window and check the paper type setting of each tray.
*Stapling is not possible on labels, glossy paper, transparency film, or envelopes.
In addition, if "Disable Staple" is selected in the user type, stapling will not be
possible.
!
Solution
■ Check the stapling position in "PREVIEW SCREEN".
!
Solution
■ Wait until several of the jobs have been executed.
17