Heatscope MHS-600 Original Installation And Operating Instructions page 15

4.5 HEATSCOPE™ installation devices and accessories (available optionally)
Please refer to the separately available instruction manuals.
Radio receiver module
MHS-FBM US
MHS-FBM US2
Connecting element
MHS-ESM US
MHS-ESM US
* The HEATSCOPE™ ¤ radiant heater is normally delivered with an open cable without a plug. The
connection and the relevant tests required for stationary units must be performed and documented by a
qualified electrician. Note here, in any case, the appropriate standards, e.g. VDE etc.
The connection cable MHS-ASK with safety plug (with silicone cable and cable connectors, black with
locking pin, 16 A/250 V AC AWG15, length approx. 59 Inch 1,5m) is available as an accessory - exclusively
for the European market.
Hand-held remote control
MHS-FBHS
Oval attachment for
DAH MHS-DAHDB
Wall-mounted remote control
MHS-FBWS