Technical Specifications - HPE ProLiant MicroServer Gen8 Quickspecs

QuickSpecs

Technical Specifications

System Unit Dimensions (H x W x D)
(with feet)
Weight (approximate)
Input Requirements
(per power supply)
BTU Rating
Power Specifications
Power Supply Output
(per power supply)
System Inlet
Temperature
9.15 x 9.06 x 9.65 in (23.24x 23 x 24.5 cm)
Maximum
(all hard drives, power supply
and processor installed)
Minimum
(one hard drive, power supply,
and processor installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Rated Input Power
Maximum
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL:
http://www.hp.com/go/hppoweradvisor
Rated Steady-State Power
Maximum Peak Power
Operating
HPE ProLiant MicroServer Generation 8 (Gen8)
21.60 lb (9.8 kg)
15.13 lb (6.8 kg)
100 -- 127 VAC,
200 - 240 VAC
3.5 A (at 110 VAC),
2 A (at 200 VAC)
50 to 60 Hz
For 150W Power Supply
192 W (at 100 VAC),
185 W (at 200 VAC)
For 200W Power Supply
243 W (at 100 VAC),
237 W (at 200 VAC)
For 150 W Power Supply
682 BTU/hr (at 100 VAC),
665 BTU/hr (at 200 VAC)
For 200 W Power Supply
838.86 BTU/hr (at 100 VAC),
825.22 BTU/hr (at 200 VAC)
For 150 W Power Supply
150 W (at 100 VAC),
150 W (at 200 VAC)
For 200 W Power Supply
200 W (at 100 VAC),
200 W (at 200 VAC)
For 150 W Power Supply
150 W (at 100 VAC),
150 W (at 200 VAC)
For 200 W Power Supply
200 W (at 100 VAC),
200 W (at 200 VAC)
10° to 35°C (50° to 95°F) at sea level with
an altitude derating of 1.0°C per every 305
m (1.8°F per every 1000 ft) above sea level
to a maximum of 3050 m (10,000 ft), no
direct sustained sunlight. Maximum rate of
Page 25