HPE ProLiant MicroServer Gen8 Quickspecs page 26

QuickSpecs
Technical Specifications
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
(Fully Loaded)
Acoustic Noise
(Lightly Loaded)
Emissions Classification
(EMC)
Non-operating
Operating
Non-operating
Operating
Non-operating
Idle
150W PSU LWAd
LpAm
200W PSU LWAd
LpAm
Operating
150W PSU LWAd
LpAm
200W PSU LWAd
LpAm
Idle
150W PSU LWAd
LpAm
200W PSU LWAd
LpAm
Operating
150W PSU LWAd
LpAm
200W PSU LWAd
LpAm
FCC Rating
Normative Standards
HPE ProLiant MicroServer Generation 8 (Gen8)
change is 10°C/hr (18°F/hr). The upper limit
may be limited by the type and number of
options installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate
of change is 20°C/r (36°F/hr)
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature,
non-condensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3050 m (10,000 ft). This value may be
limited by the type and number of options
installed. Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
3.9 BELS
21.0 dBA
3.4 BELS
18.0 dBA
3.9 BELS
21.0 dBA
3.5 BELS
18.0 dBA
3.4 BELS
18.0 dBA
3.3 BELS
18.0 dBA
3.5 BELS
18.0 dBA
3.4 BELS
18.0 dBA
Class B
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
Page 26