Standard Features - HPE ProLiant MicroServer Gen8 Quickspecs

Table of Contents

Advertisement

QuickSpecs

Standard Features

Processor
Cache Memory
Chipset
On System Management
Processor
Memory Protection
Memory
Network Controller
Expansion Slots
HPE Server ROM
Intel® Celeron® G1610T (2.3Hz/2-core/2MB/35W) Processor
Intel® Pentium® G2020T (2.5GHz/2-core/3MB/35W) Processor
NOTE: Intel® Celeron® G1610T and Intel® Pentium® G2020T support up to 1333MHz DDR3 memory
speed.
Intel® Core™ i3-3240 (3.4GHz/2-core/3MB/65W) Processor
NOTE: Intel® Core® i3-3240 support up to 1600MHz DDR3 memory speed.
Intel® Xeon® E3-1220Lv2 (2.3GHz/2-core/3MB/17W) Processor
NOTE: Intel® Xeon® E3-1220Lv2 supports up to 1600MHz DDR3 memory speed.
3MB (1 x 3MB) L3 Cache
NOTE: For Dual-core Pentium and Xeon processors.
2MB (1 x 2MB) L3 Cache
NOTE: For Dual-core Celeron processor.
NOTE: All processor models above list the L3 Cache associated with that particular processor.
Intel® C204 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo.
ECC
Type
DIMM Slots Available
Standard
Maximum
NOTE: HPE memory from previous generation servers are not fully compatible with the HPE
ProLiant MicroServer Gen8.
HPE Ethernet 1Gb 2-port 332i Adapter
Expansion
Technology
Slot #
1
PCIe 3.0/2.0*
NOTE: * Processor dependent. Xeon is PCIe 3.0. Celeron and Pentium are PCIe 2.0.
NOTE: ** Indicates the number of physical electrical lanes running to a PCI-e connector.
HPE ROM (Read Only Memory) is now digitally signed using The Hewlett Packard Enterprise
Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental
programming and preventing malicious efforts to corrupt system ROM.
HPE SmartMemory
DDR3 Unbuffered (UDIMM)
2
4GB (1 x 4GB) PC3L-12800E DDR3 UDIMM
16GB (2 x 8GB) PC3-12800E DDR3 UDIMM
Bus
Width**
x16
HPE ProLiant MicroServer Generation 8 (Gen8)
Connector
Form Factor
Width
x16
Low Profile
Notes
Page 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents