HPE ProLiant MicroServer Gen8 Quickspecs page 4

QuickSpecs
Standard Features
Industry Standard
Compliance
Server Power Cords
Power Specifications
Power Supply
System Fans
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Graphics
USB 3.0 Ports
Network RJ-45 (Ethernet) 2 (Port 1 shared for HPE iLO4 as optional configuration)
ACPI V2.0b Compliant
PCIe 2.0 Compliant
PXE Support
WOL Support
USB 2.0
USB 3.0
SATA Gen 2
SATA Gen 3
The MicroServer models ship standard with a 6' country specific NEMA power cord. If customers
require an alternative local power cord, they can check the power cord matrix for the appropriate
country specific sku. Please see the following power cord matrix:
http://www.hp.com/go/powercordmatrix.
To review typical system power ratings use the HPE Power Advisor which is available via the online
tool located at URL: http://www.hp.com/go/proliant-energy-efficient or
http://www.hp.com/go/hppoweradvisor.
NOTE: See Technical Specifications section at end of QuickSpecs for Power Specifications.
One (1) 150 Watts Non-Hot Plug, Non redundant Power Supply
One (1) - Non-redundant system fan shipped standard
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on The Hewlett Packard Enterprise Certified and Supported
ProLiant Servers for OS and Virtualization Software and latest listing of software drivers
available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
and our driver download page: http://www.hp.com/support/MicroServerGen8
Integrated Matrox G200 video standard
•
1280 x 1024 (32 bpp)
•
1920 x 1200 (16 bpp)
HPE iLO 4 On System Management Memory
•
16 MB Flash
• 256 MB DDR 3 with ECC (112 MB after ECC and video)
2 total (2 rear)
NOTE: Functional after OS boot.
HPE ProLiant MicroServer Generation 8 (Gen8)
Page 4