Table of Contents
Advertisement
5.2
Web Manager
Before accessing the Web Manager, verify the state of the DV-302 LED is blinking. This
indicates that the DV-302 is ready to be configured. Of course, LAN or WAN LED hast to be
turned on in order to access WEB Manager.
1) Open a new Web browser window and enter the DV-302‟s IP address of the LAN
interface (PC port).
2) Enter "http://192.168.0.1" for the URL without any specific port number. At this point,
the PC should present an authentication window similar to the one shown below:
3) Enter "root" in the User name and "admin" in the password field.
NOTE
You have to enter "http://<the IP address of DV-302 WAN interface (NET
port)>:8000" through the internet remotely.
DV-302 OPERATION MANUAL
19
Advertisement
Table of Contents
