Table of Contents
Advertisement
DV-302 OPERATION MANUAL
2) Connect a straight-through Ethernet cable from your PC to the 10/100 PC RJ-
45 LAN port.
3) Connect a straight-through Ethernet cable from your ADSL modem‟s LAN port
to the DV-302 Network (WAN) port.
4) Insert the power plug of adaptor into the power jack of the DV-302.
5) Connect the plug end of the 12V DC power adaptor cord into a functional
electrical outlet.
6) When the DV-302 is properly connected and powered up, the green power
(PWD) illuminates and the green status (STS) LED flashes to indicate that the
DV-302 is working as it should.
NOTE
The telephone must be switched to tone setting (not pulse) for the DV-302
to operate property.
WARNING
Use only the power adaptor supplied with the product.
CAUTION
Do not cover or block the air vents on either the left or the right surface of
DV-302. Overheating can cause permanent damage to the DV-302
10
Advertisement
Table of Contents
