Table of Contents
Advertisement
DV-302 OPERATION MANUAL
4.2.8 LED Status
When DV-302 is turned on, you can easily observe the current operation status of
the system using LEDs located on the product.
LED STATUS
PWR LED
Light ON
Blink rapidly
Light OFF
STS LED
Blink per 0.25 sec
Blink per 1 sec
Light ON
NET LED
Light OFF
Blink
Light ON
PC LED
Light OFF
Blink
Light ON
Light OFF
TEL LED
Blink
If there is no LED light, check the power cable connection or external adapter.
Device will be restarted when you push the <DEFAULT> button shortly at the
rear of DV-302
When pushing the <DEFAULT> button about 4-5 sec, factory default settings will
be reloaded; the power LED will be ON and STS LED will be OFF.
TABLE 6. LED STATUS
When power is present (POWER ON).
After power on, light OFF for 10 seconds
For the image loading time. About 15 seconds
IP Address assignment is completed
But Registration is still on progress.
VOIP registration is completed successfully
Connected physically
Lost Physical WAN connection
Data is being transferred over the connection
Connected physically
Lost Physical LAN connection
Data is being transferred over the connection
In-USE (Off-hook)
Not in-USE (On-hook)
Ringing (according to Ring cadence)
Voice Message Waiting Indication
NOTE
STS LED is blinking per 1 second even though one of TEL port is not
registered.
SYSTEM STATUS
14
Advertisement
Table of Contents
