Operation; User Log-In; Camera Registration - Digital Watchdog VMAX IP PLUS User Manual

13 | VMAX IP Plus™ NVR

Operation

3.
3.1

User Log-in

Input USER and PASSWORD after turning on the system. The factory default of user and password are
"admin" and no password.
Note
1) LOGIN window will be permanently displayed until a user logs in with the right ID and
password.
2) If NVR is set as AUTO LOGIN, login process is not necessary. See "4.1.2 User" for more
information.
Note
The key in the virtual keyboard includes common words, such as Admin, root,
http://, rtsp://, www., .com, .net, .org etc.
3.2

Camera Registration

The NVR can connect to any ONVIF® IP cameras over the network. If the cameras are connected to the
PoE switch in the back of the NVR, the cameras will also receive power and transmit data to and from the
NVR.
3.2.1. PoE Camera Connection
PoE cameras are automatically connected when the camera is plugged to the PoE port. Channels assigned
to cameras connected to the NVR's PoE switch will display the channel title in green.
Cameras connected to the NVR's PoE switch must be set to 'DHCP' before connecting to the NVR.
For cameras that support 'Auto IP', the NVR will automatically control its IP settings.
If PoE camera is connected to the PoE channel while another camera is being assigned to that
Note
channel, the previously assigned camera moves to another channel and the PoE camera will be
assigned to that channel.
Zero-Configuration
Note
It is the Link-Local IP address assignment method through Auto-IP and it is for assigning IP,
automatically, when the DHCP is not available or supported. The device that adopts this
technology selects 169.254.xxx.xxx, in general, and assign the IP address after checking the
availability of the selected IP address