Table of Contents
Advertisement
Operation
3.
User Log-in
3.1
Input USER and PASSWORD after turning on the system. The factory default of user and password are
"admin" and no password.
Note
1)
LOGIN window will be permanently displayed until a user logs in with the right ID and
password.
2)
If the DVR is set as AUTO LOGIN, the login process is not necessary. See "4.1.2 User" for
more information.
Live Display Mode
3.2
3.2.1. Channel Selection
Live image can be seen by using the easy button operation after power-up.
The images can be viewed in 1,4,9, and 16 screen splits. When the up/down arrow button on the front panel
or IR remote controller is pressed and when the screen display mode button (
the screen will be sequentially changed.
To select channel by mouse, simply click. To return to previous screen mode after selecting a full channel,
click of the left mouse button again.
Note
Some screen mode may not be available.
"VIDEO LOSS" is shown on the display screen when no camera is connected or a camera is disconnected on
a certain channel. When a camera is disconnected, a warning sound may be generated depending on the
system settings.
[1 Ch]
[9 Ch]
) on the tool bar is clicked,
[4 Ch]
[16 Ch]
14
Advertisement
Table of Contents
