Camera Setup - Digital Watchdog VMAX IP PLUS User Manual

17 | VMAX IP Plus™ NVR
PoE Camera - PoE cameras cannot be deleted while connected to the NVR's PoE switch.
In order to delete a PoE camera, unplug the camera from the NVR and click
activated.
3.4

Camera Setup

User can change setup of registered camera.
3.4.1. Setup for Each Camera
Click [ADVANCED CONFIGURATION] in Camera Management menu ("Menu > Record").
Go to setup mode by clicking the [SETUP] button next to a desired camera.
You can also access the camera's setup menu by right-clicking anywhere on the screen during live view and
selecting [CAMERA SETUP].

Click [GET STREAM] button and get current camera status.
Click [SETUP] button to change resolution, frame rate, image quality etc.
 RESOLUTION: Select the rescoring resolution from the available
drop-down options.
 FRAMES PER SECOND: Set the stream's frames per second
speed from 0 to 30.
 BITRATE: The maximum bitrate that camera use for image
transmission.
 QUALITY: Image quality for recording. The higher the quality, the
larger the recording file size will be.
 GOP: Group of pictures. The interval of I-Frame.

H.264 I-REFERENCE: Recording frame interval out of
transmitted frames. (ex. x2 means records one frame out of two frames) If it is not used, NVR records
all transmitted frames. (Check your camera's manual to make sure it supports this setting)
Current Streaming conditions – This will display the camera's recording mode and FPS in real-time.
 FRAMES PER SECOND: It shows the current transmission frame.
 REC.: It shows the stream that NVR records for the camera.
button when it is

