Digital Watchdog VMAX IP PLUS User Manual page 63

59
4.5.4. MOBILE NOTIFY
The system can send an event notification to the mobile device registered in the NVR.
The mobile app 'MobileViewerPro' must be installed in your smart phone device prior to registration. Select
[USE MOBILE NOTIFY] to use this function and select event to notify.
In the mobile app, add your NVR using the IP address or DDNS by clicking the + sign on the top right side of
the app.
Once the site has been added to the device list on the app, highlight the NVR in the list and press the Setup
button on the bottom right side of the app. Make sure 'Use Push Check' is enabled.
The mobile device's ID will appear in the Mobile Notify table in the NVR.
Note 1. Mobile Push Notification function is available with iPhone, iPad & Android devices.
2. Registration for Mobile Push Notification is available when it is set at the mobile device.
3. Deletion of the list will be available when you click "Delete" button in the NVR menu or
when you select disable Push Notify function in the mobile device.
4.
Maximum number of mobile devices is 50.
DELETE
When the mobile device is registered to the NVR correctly, it shows in the list.
Device ID is a unique ID of the mobile device.
If you want to delete it, select the device and click [Delete] button. Then, push notification setup in the mobile
device will be disabled.
1. Push Notification function only works when the NVR & mobile device has network
Note
connection to internet.