Digital Watchdog DW-VP92T4P Quick Start Manual

9ch w/4 POE 12ch w/8 POE 16ch w/8 POE
DW-VP92T4P DW-VP123T8P DW-VP163T8P
DW-VP94T4P DW-VP124T8P DW-VP164T8P
DW-VP96T4P DW-VP126T8P DW-VP166T8P
DW-VP129T8P DW-VP169T8P
DW-VP1212T8P DW-VP1612T8P
Username: admin Password: no password
WHAT'S IN THE BOX
CD (QSG + Manual
48V D/C
+ Software) & Quick 1 Set
& Power Cable
Start Guide
Terminal Block
IR Remote Control 1 Set
and Rubber Mount
USB Mouse 1 Set
Model Total PoE Power Budget Max Power per Port
DW-VP9-4P 90.24Watt 15.4Watt
DW-VP12-8P
158.4Watt 15.4Watt
DW-VP16-8P
DW-VP16-16P 200Watt 15.4Watt
Attention: This document is intended to serve as a quick reference page for initial set-up.
It is recommended that the user read the entire instruction manual for complete and proper NVR usage.
Tel: 866-446-3595 / 813-888-9555
Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday
Quick Start Guide
Step 1 – CONNECTING THE NVR
1. Mount and install all necessary cameras and external devices. Refer to their individual manuals for
additional information.
16ch w/16 POE
2. Place the NVR in its final position. See installation tips below.
DW-VP163T16P
DW-VP164T16P
3. Connect all necessary cables to the NVR
DW-VP166T16P
DW-VP169T16P
4. Once all additional devices have been properly connected to the NVR, connect the NVR to
DW-VP1612T16P
an appropriate power supply. The NVR will boot up automatically.
1 Set
1 Pair
(2 Pieces)
1 Set
SAFETY TIPS
1. Make sure the cameras and the monitors are properly connected to the NVR.
2.
The NVR should be placed in a dust and moisture free environment. It must never be directly exposed to
sunlight. Server room temperature is highly recommended to reduce the chance of overheating, which
may cause the NVR to become unstable.
3. During the boot up process, the NVR should not be interrupted by pressing any buttons on the mouse.
Do not unplug the power adapter or turn the NVR off during the boot up process.
4. A UPS (Uninterrupted Power Supply) is highly recommended to prevent damage to the NVR during a
digital-watchdog.com
power outage.
www.a1securitycameras.com email: sales@a1securitycameras.com
CAMERA
PoE1
DC 48V PoE2
ADAPTER
Available from A1 Security Cameras
Step 2 – POWERING UP THE NVR
1. When the NVR boots up, it will be in protective mode. This
means you will not be able to access the NVR's setup menu
until you enter the proper username and password.
2. To unlock the NVR, right-click anywhere on the screen. The
login screen will appear. (Default Username / Password:
admin / no password)
3. When the NVR boots up for the first time, you will be guided
through the Startup Wizard.
TV OUT
PoE3 PoE5 PoE7 RS485 SENSOR IN ALARM OUT+
LAN
PoE4 PoE6 PoE8 eSATA AUDIO OUT HD OUT VGA OUT USB
RS485 SENSOR IN ALARM OUT-
Back Panel Ports may differ according to model
NETWORK CABLE USB MOUSE
Quick Start Guide
HD MONITOR
VGA MONITOR
PTZ CAMERA ALARM / SENSOR