Playback Recorded Images - Digital Watchdog VMAX IP PLUS User Manual

23 | VMAX IP Plus™ NVR
ZOOM/FOCUS
Move zoom-in/out by rolling the wheel of mouse up/down. If mode is changed to "Focus",
the camera's focus can be controlled by rolling the wheel of mouse.
PRESET
When the preset menu pops-up, select the preset number and click "Enter" to move to
the corresponding preset position. Maximum Preset number supported is 255.
TOUR
Enable the TOUR function. When 'TOUR' is on, the camera will move to preset positions
in order. To turn the tour off, right-click on the screen and select 'Tour'.
GUARD TOUR
When enabled, the camera will automatically switch positions according to the sequence of presets set in
the GUARD TOUR settings. See "4.2.3 PTZ" for more information.
Caution
User can set interval for each preset position. Some presets might be skipped in case the camera
cannot mechanically move or control focus within the interval time.
GOTO HOME
Camera moves to the original position that is memorized in the PTZ device.
SETUP
Go to PTZ setup menu (Please refer to "4.2.3. PTZ").
PTZ EXIT
Close PTZ control mode.
3.7

Playback Recorded Images

To playback recorded image, press the Play button on the font panel, IR remote controller or playback icon
( ) in the menu bar. When the NVR transitions to playback mode, it will automatically playback the latest
recording image.


Date/Time ()
Shows date & time of the image that is being displayed.
Tool Bar ()
Contains playback control, recorded data check, screen mode etc. (See "1.3.4. Tool Bar on Playback Mode"

