Digital Watchdog VMAX IP PLUS User Manual page 40

4.1.2. USER
The ADMIN user (default password is no password) has full authority for system setting and can change the
system password or add/delete users and assign different permission level to them.
Note Maximum number of users including administrator is 16.
User Management
Admin user can control authorization for each function. This authorization is applied when the user connects
to the NVR from a remote software as well.


Add User
To add new user, click [ADD]. In the new setup window, set new user's ID,
description, and password. Select which functions and menu options the
user will have access to by checking the box next to the corresponding
functions.
In Live and Playback mode, only the selected channels are visible to the
user.
To change the setting, select user and click [Edit].
Delete User
Select user in the list by highlighting their name and click [Delete].
Option
 If Auto Logon "On Boot" is enabled, the NVR will not request ID and password after power up.
 If "Auto Logoff" is enabled, the NVR will log off the current user after the set
time of inactivity.
Setting Authorized Level at the Remote Software (CMS)
Level of authority for the user is linked between the NVR and Remote Software.
If a user has been restricted in the NVR, those restrictions will also be applied
when operating the Remote Software.
4.1.3. DISPLAY
Set the sequence dwell time, Display Resolution, OSD display options and spot-out channel & dwell time as
below picture.
User Manual | 36
