Network - Digital Watchdog VMAX IP PLUS User Manual

HDD FULL ()
Select "Overwrite" or "Stop recording" when HDD is full.
 Overwrite : NVR deletes oldest data and records new data.
 Stop recording : NVR stops recording.
HDD CHECK ()
Click ( ) next to each HDD to view full information of each HDD
such as model name, serial no, capacity, bad sector ratio, life time (used
time) and temperature.
HDD FORMAT ()
Check the box next to the HDDs you wish to format and press the
"FORMAT" button. If system resources are occupied such as network
connection during format process, the format process may fail. It is
recommended to reboot the system to release system resources and then
try to format again.
Note
1) It may take a few minutes to format HDD.
2) When the format is done, all data in the HDD will be deleted.
3) The system always reserves some space in each built-in HDD to effectively utilize archiving
memory.
2.4

Network

Setup the NVR's network settings for remote connection.
NETWORK TYPE
Select either STATIC IP or DHCP for dynamic IP.
If DHCP is selected, the NVR will automatically configure the network settings according to the current
network requirements. If DHCP is selected, click 'IP DETECT' button to detect automatically all the network
settings.
If Static IP is selected, manually enter all necessary network settings. For proper configuration, it is
recommended to assign the NVR a DHCP address and let it auto discover all the proper network settings,
and then change the Network Type back to Static IP and save the changes
User Manual | 10