Troubleshooting - Strong SRT 7007 User Manual

8.0 TroubLEshooTInG

There may be various reasons for abnormal operation of the receiver. Please check the receiver
according to the procedures shown below. If the receiver does not work properly after
please contact your local Service line or STRONG dealer. Alternatively you can send a support mail via
our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous
situation and will void the warranty.
Network Apps
ProbLEM
The standby indicator does
not light up
No picture
No picture or sound on TV
Scrambled channel
message
26
Two simple network programs have been integrated in to the unit, a Weather
program and a RSS newsreader program. Some default cities and newsfeeds
have been incorporated, follow the on screen menu to enter your own
preferences.
PossIbLE CAusE
The mains lead is unplugged/
the multipoint connector is
switched off.
The receiver can't receive
signal.
Incorrect values of some tuner
parameters.
Wrong direction of the dish.
The input is not selected on
your TV.
The TV is not connected to
the mains.
Bad cable connection.
Audio muting.
TV power off.
The channel is scrambled.
WhAT To Do
Check the mains lead/switch
the multipoint connector on.
Check the antenna cable,
replace the cable, or connect
the cable to the receiver
tightly.
Set the values of tuner
parameters correctly in the
Installation menu.
Check signal strength and
adjust your dish correctly.
Switch to the correct TV input.
Check the mains lead.
Firmly plug in the cables
between the receiver and TV.
Press the ! button.
Turn the TV on.
Select an alternative channel.
ing it,