Auto Dial Numbers; Programming - Oki OKIFAX 5400 User Manual

manually on the numeric keypad. Press the Start key to begin sending the
fax.

Auto dial numbers

Programming

Your fax machine has 99 Auto Dial numbers available for quick, two-digit
selection and dialling. For each Auto Dial number, you can enter a fax
number up to 32 digits long and a Location ID (name) up to 15 characters
long.
1. Press the Select Function key, then press the 8/Location Program
One Touch key. The display shows LOCATION PROGRAMMING.
2. Press the Auto Dial key.
3. Using the numeric keypad, enter a 2-digit number for the Auto Dial
number (01 to 99) you want to program.
4. The display will briefly show NO=<FAX NO.>, ID=<LOCATION
ID> or a previously-programmed fax number and location.
5. Enter the fax number. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens (i.e. to wait for dial
tone)
Enter pauses (i.e., to wait for outside
lines)
Add a switch from pulse to tone
dialling for part of the call
Move the cursor to make corrections YES and NO keys.
6. Press the Start key.
7. Enter the Location ID. This is a descriptive title up to 15 characters
long. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens
Enter alphabet characters
38
Numeric keypad
Space One Touch key
Hyphen key
Pause key
*/Tone key
Numeric keypad
Space One Touch key
Hyphen key
Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears.
Use
Use
User's Guide