Setting Fax Machine Identification - Oki OKIFAX 5400 User Manual

Setting fax machine identification

1. Press the Select Function key.
2. Press the 9/User Program One Touch key. The display shows
1:FUNC. PROGRAMMING.
3. On the numeric keypad, press 4. The display shows 4:SYSTEM
DATA PRG.
4. Press the YES key. The display shows NO=<TSI/CSI>,
ID=<SENDER ID>.
5. After the display clears, enter the full telephone number of your fax
machine using the numeric keypad.
Note:
Use the Hyphen key to enter a "+" character before
the number, which is the generally recognised
method of indicating the international access code
before the country dialling code. The Space One
Touch key is used to enter spaces in a number.
6. Press the Start key to save your entry.
7. Enter your Sender ID. This is a descriptive title up to 32 characters
long. Refer to the instructions below.
To Do This
Enter numbers
Enter spaces
Enter hyphens
Enter alphabet characters
Enter a unique character.
Enter next character
Move the cursor to make corrections YES and NO keys.
8. Press the Start key to save your entry. The display shows
NO=<CALL BACK NO.>.
9. After the display clears, use the numeric keypad to enter the
telephone number you want to use for call back messages. Enter up
to 20 characters.
Installation
Numeric keypad
Space One Touch key
Hyphen key
Locate the character you want on the numeric keypad.
Press that key repeatedly until the character appears.
Press the 0/Unique key repeatedly until the character
you want appears. The following characters are
available: ! # & ' ( ) * + , - . / : ; = ? _ ä ¤ ñ ö ü Æ Å Ø
æ å ø.
Press the NO key to move the cursor to the next
position for the next character.
Use
31