Access Control - TP-Link ARCHER MR200 User Manual

Chapter 6
Done!
6 2

Access Control

Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
How can I
do that?
1 ) Select Block wireless access from the devices in the list
below and click Save.
2 ) Select the device(s) to be blocked in the
table.
3 ) Click Block above the
devices will be added to
To allow specific device(s)
1 ) Select Allow wireless access only from the devices in the
list below and click Save.
2 ) Click Add.
3 ) Enter the MAC Address
MAC Address
connected to your wireless network).
4 ) Enter the Description
5 ) Select the checkbox to enable this entry, and click OK.
Now MAC Filtering is implemented to protect your wireless
network.
Block or allow specific client devices to access my network (via
wired or wireless).
1 Visit http://tplinkmodem.net, and log in with the password
you set for the router.
Devices Online
Devices List
(You can copy and paste the
from Devices Online
of the device.
Network Security
Devices Online
table. The selected
automatically.
list if the device is
24