TP-Link ARCHER MR200 User Manual page 67

Chapter 11
8 ) Enter the Pre-Shared Key
keep Perfect Forward Secrecy
Note:
Make sure Site A and Site B use the same key.
9 ) Leave the Advanced
OK to save.
3 Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same pre-shared keys
settings.
4 The Status column will change to
has been set up successfully.
5 5. Check the VPN connection. You can ping site B' LAN IP
from your computer to verify that the IPSec VPN connection
is set up correctly.
Tips: To check the VPN connection, you can do the following.
a . On the host in Site A, press
Run dialog. Input "cmd" and hit
b . In the CLI window, type in "ping 192.168.2.x" ("192.168.2.x"
can be IP address of any host in Site B). Then press [Enter].
Specify Your Network Settings
for IKE authentication. Then
enabled.
Settings as default value. Then click
and Perfect Forward Secrecy
Up if the VPN connection
[Windows Logo]
OK.
+ [R] to open
63