Table of Contents
Advertisement
Chapter 13
13 1
Protect the Network from Cyber Attacks
The SPI (Stateful Packet Inspection) Firewall protects the router from cyber attacks
and validate the traffic that is passing through the router based on the protocol. This
function is enabled by default.
1
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2
Go to
Advanced
13 2
Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Deny List) or a list of allowed
devices (Allow List).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1 Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2 Go to
Advanced
3 Toggle on to enable
3 Click
Change Mode
allow the device(s) in the list.
To block specific device(s):
1 ) Select
Deny
List.
>
Security
> Firewall. It's recommended to keep the default settings.
>
Security
>
Access
Access
Control.
and select the access mode to either block (recommended) or
Control.
Network Security
68
Advertisement
Table of Contents
