TP-Link ARCHER MR200 User Manual page 87

T6 How to use the router as a regular wireless router to share my Internet ?
The router support two operation modes, 3G/4G Router Mode and Wireless Router
mode. If you already have a modem or your Internet comes via an Ethernet cable from
the wall, you can set up the router as a regular wireless router to share the Internet.
1 Connect your router's LAN4/WAN port to the modem or the network port.
2 Visit http://tplinkmodem.net, and log in with password you set for the router.
3 Go to Advanced
4
Select the Wireless Router Mode
Note:
In wireless router mode, you can use 3G/4G network as a backup solution for Internet access. When
is enabled, your router will be directly connected to the 3G/4G network when the original network service fails. To
enable or disable 3G/4G Backup, go to
T7 How to use the WDS Bridging function to extend my wireless
network?
My house covers a large area. The wireless network coverage of the router I'm using
(the root router) is limited. I want to use an extended router to extend the wireless
network of the primary router. Follow the steps to configure the router.
> Operation Mode page.
option and click
Advanced > Network
Save to make the settings effective.
> Internet.
3G/4G Backup
83