System Log - TP-Link ARCHER MR200 User Manual

Chapter 12
3
Tick the checkbox to enable
setting. Leave the
device to manage the router, you can enter the IP address of the remote device in
the IP/MAC Address
4 Click Save to make the settings effective. Now, all devices on the Internet can log
in to http://router's WAN IP address:port number (such as http://113.116.60.229:80)
to manage the router.
Tips:
1. You can find the WAN IP address of the router on
2. The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
12 7

System Log

System Log can help you know what happens to your router, facilitating you to locate
the malfunctions. For example when your router does not work properly, you will need
to save the system log and send it to the technical support for troubleshooting.
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2
Click Advanced >
Remote
IP/MAC Address field blank. If you just want to allow a specific
field.
Basic
System Tools > System Log
Management. Keep the
> Network Map > Internet.
Set Up a Dynamic DNS Service Account
page.
Administrate Your Network
Port as the default
if you want to log
70