Product Appearance; Top View - TP-Link ARCHER MR200 User Manual
Wireless dual band 4g lte router
Hide thumbs
Also See for ARCHER MR200:
- Quick installation manual (63 pages) ,
- Manual (8 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Chapter 1
1 3
Product Appearance
1 3 1
Top View
The router's LEDs are located on the top panel (view from top to bottom). You can check
the router's working status by following the LED Explanation table.
Name
Power
Internet
4G
Wireless
LAN
LED Explanation
Status
On
System initialization complete.
System initializing or firmware upgrading is in process. Do not
Flashing
disconnect or power off the router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On
Internet connection is available.
No Internet connection. Please refer to
Off
troubleshooting.
On
The router is using the 4G network.
The router is using another network other than the 4G
Off
network.
On
At least one wireless radio band (2.4 GHz or 5 GHz) is enabled.
Off
The wireless radio band is disabled.
On
At least one LAN port is connected.
Off
No LAN port is connected.
Get to Know About Your 4G LTE Router
Indication
Note 1
for
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ARCHER MR200 and is the answer not in the manual?
Questions and answers
Здравствуйте у меня старый тп линк мр200 как мне с помощью него подключиться к другому роутеру для расширения зоны обхвата
To connect the TP-Link Archer MR200 to another router to extend wireless coverage, follow these steps:
1. Log into the web-based management interface of the Archer MR200.
2. Change the LAN IP address of the MR200 to be in the same subnet as the main (root) router. For example, if the root router’s IP is 192.168.0.1, set the MR200 to something like 192.168.0.2. Go to Advanced > Network > LAN Settings.
3. Go to Advanced > Wireless > Advanced Settings.
4. In the WDS section, enable the WDS Bridging function for the 2.4GHz or 5GHz band as needed.
5. Click "Survey" to scan for available wireless networks and select the root router’s network.
6. Enter the wireless password of the root router to complete the connection.
This will extend the wireless coverage of your primary router using the Archer MR200.
This answer is automatically generated