TP-Link ARCHER MR200 User Manual page 91

Wireless dual band 4g lte router

Hide thumbs Also See for ARCHER MR200:

Quick installation manual (63 pages)

Manual (8 pages)

Setup manual (2 pages)

Table Of Contents

Table of Contents

5 ) Select

Wireless Zero

Configuration, right click it, and then select Properties;

6 ) Change

Startup type

to Automatic, click on Start button and make sure the

Service status is Started. And then click OK.

Table of Contents

Show Quick Links

Hide quick links:

Table of Contents

Need help?

Do you have a question about the ARCHER MR200 and is the answer not in the manual?

Questions and answers

Вадим

April 14, 2025

Здравствуйте у меня старый тп линк мр200 как мне с помощью него подключиться к другому роутеру для расширения зоны обхвата

1 comments:

Mr. Anderson

April 15, 2025

To connect the TP-Link Archer MR200 to another router to extend wireless coverage, follow these steps:

1. Log into the web-based management interface of the Archer MR200.

2. Change the LAN IP address of the MR200 to be in the same subnet as the main (root) router. For example, if the root router’s IP is 192.168.0.1, set the MR200 to something like 192.168.0.2. Go to Advanced > Network > LAN Settings.

3. Go to Advanced > Wireless > Advanced Settings.

4. In the WDS section, enable the WDS Bridging function for the 2.4GHz or 5GHz band as needed.

5. Click "Survey" to scan for available wireless networks and select the root router’s network.

6. Enter the wireless password of the root router to complete the connection.

This will extend the wireless coverage of your primary router using the Archer MR200.

This answer is automatically generated