TP-Link ARCHER MR200 User Manual page 88

1 Visit http://tplinkmodem.net, and log in with password you set for the router.
2 Configure the LAN IP address
For example, if the IP address of the root router is 192.168.0.1, the IP address of the
extended router should be from 192.168.0.2 to 192.168.0.254.).
3 Go to Advanced
4 Select the wireless network 2.4GHz or 5GHz appropriate to your needs and select
the checkbox to enable the
5 Click Survey to scan all the AP devices and choose the root AP to be bridged.
6 Click the connect icon and then the SSID and MAC will be auto-populated. Configure
the Security settings as the AP you choose to be bridged.
of the router in the same subnet as the root router.
> Wireless > Advanced Settings
WDS Bridging
page and locate the
function.
WDS section.
84