TP-Link ARCHER MR200 User Manual page 24

Wireless dual band 4g lte router

Hide thumbs Also See for ARCHER MR200:

Table of Contents

Chapter 5

1 )

IP Range:

Enter the IP address. The field can be single IP

address or IP address range according to your demands.

When you enter a single IP address, the computer with

this IP address will get independent given bandwidth.

When you enter an IP address range, all computers in the

range will share the given bandwidth.

2 )

Port Range:

Keep the default settings. The default port

range of TCP protocol or UDP protocol is from 1 to 65535.

3 )

Protocol:

Keep the default setting. Or you can choose the

TCP protocol or UDP protocol or both of them.

4 )

Priority:

Keep the default setting. You can change the

value if you want to first guarantee the bandwidth for

one computer. The smaller value has the higher priority.

5 )

Upstream/Downstream:

to your division.

6 ) Check to enable this entry and click

settings.

6 Follow the steps above to add a rule for the other client

device. And then you will get the following table.

Bandwidth Control

Enter the bandwidth according

to save the

Table of Contents

Show Quick Links

Table of Contents