TP-Link ARCHER MR200 User Manual page 85

• Use another web browser or computer and log in again.
• Reset the router to factory default settings: With the router powered on, press and
hold the WPS/RESET button on the rear panel of the router until the Power LED
starts flashing.
Note: You'll need to reconfigure the router to surf the Internet once the router is reset.
Open a web browser and log in again. If login fails, please contact the technical
support.
T4 What can I do if I cannot access the Internet?
1 Verify that your SIM card is an LTE, WCDMA or GSM card.
2 Verify that your SIM card is in your ISP's service area.
3 Verify that your SIM card has sufficient credit.
4 Check the LAN connection:
Open a web browser and enter
address bar. If the login page does not appear, refer to T3 and then try again.
5
Check your ISP parameters:
1 ) Open a web browser and log in to the web management page.
http://tplinkmodem.net or http://192.168.1.1 in the
81