TP-Link ARCHER MR200 User Manual page 57

Chapter 11
2 Go to Advanced >
according to your wireless client.
3
Keep the default WPS status as Enabled and select the
4
Enter the client device's PIN in the field on the above WPS screen. Then click the
Connect button.
5 Connect successfully
device has successfully connected to the router.
Method 3 Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2
Go to Advanced
5GHz according to your wireless client.
3 Keep the Router's PIN status as enabled. Take a note of the Current PIN of the router.
You can also click the
4
On the client device, enter the router's PIN. (The default PIN is also labeled on the
bottom of the router.)
5 The WPS LED flashes for about two minutes during the WPS process.
6 When the WPS LED is on, the client device has successfully connected to the router.
Note:
Wireless >WPS page. Select the wireless network 2.4GHz or 5GHz
will appear on the above screen, which means the client
> Wireless > WPS page. Select the wireless network 2.4GHz or
Generate button to get a new PIN.
Specify Your Network Settings
PIN Code radio button.
53