TP-Link MR200 Setup Manual

TP-Link MR200 Router
Shipment Content:
1 x Protective Case
1 x 4G LTE Router
1 x Power Adapter
2 x Antennas
Quick Setup:
1. Install the antennas and position them
upwards.
2. Plug in and turn On the router.
minutes for the router to light
up when ready.
3. Connect your Wired devices. (e.g. Ethernet
enabled Printer) Connect the ethernet cable
to a yellow port on the back of the router. Plug
the other end of the cable into the printer.
LAN LED on the router lights up when
connected
.
Troubleshooting:
What if...
... the router does not power up?
... the WiFi symbol does not light up /the
devices can't find WiFi to connect to?
...the Internet symbol does not light up?
...I want to change to a hardline connection?
... I have to login to change the router setup?
Setup Video Guide:
Scan this QR code
with your phone
camera for video.
RENTAL EQUIPMENT
4.
Connect your Wireless devices (e.g.
Tablet / PC) Open the camera app on your
device and scan the QR-Code on the
bottom of the router. Alternatively use the
default SSID (Wireless Network Name) on
Allow 3-5
the bottom of the router along with the
password in your
Folder
5.
Via WPS (e.g. WPS enabled Printer) Press
The
(do not hold)
of the router until the WiFi LED starts
flashing. Then proceed to set the printer on
WPS mode as per its setup guide.
2 minutes to establish a connection. Once the
WiFi LED changes from flashing to solid a
connection
Please DO NOT press the Reset button
on the back of the router.
Please check if the power plugs are plugged in
tightly. Switch On and Off again. Wait 3 mins.
Make sure, the WiFi function is switched On.
Use the button on the back of the router.
Make sure to reach a signal strength of
to 4 bars. Relocate the router closer to a
window for better reception.
Please ask for a DHCP activated hardline cable
and plug it into the WAN/LAN port.
Please turn around for more info.
SETUP GUIDE
Important Documents
to connect wirelessly.
the WPS button on the back
Allow 1-
has been established.
3
Wait 3 mins.
Contact our Support Team:
www.choose2rent.com/help
+1 (800) 622-6484 Ext. 3 (USA)
+49 40 226 360 - 590 (Europe)