Table of Contents
Advertisement
Chapter 10
5. If you want to ignore the ping packets from the WAN port, select
if you want to ignore the ping packets form the LAN port, select
6. Click Save.
10. 2. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
I want to:
Block or allow specific client devices to access my network (via wired or wireless).
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
3. Enable
Access
Control.
4. Select the access mode to either block (recommended) or allow the device(s) in the
list.
To block specific device(s):
1 ) Select
Blacklist
2 ) Select the device(s) to be blocked in the
checkbox(es).
3 ) Click
Block
above the
Devices in Blacklist
>
Security
>
Access
and click Save.
Online Devices
automatically.
Control.
Online Devices
table. The selected devices will be added to
Network Security
Forbid Wan
Ping;
Forbid Lan
Ping.
table by ticking the
40
Advertisement
Table of Contents
