TP-Link ARCHER MR200 User Manual page 11

Chapter 1 Get to Know About Your 4G LTE Router
Description
Item
The switch for the WPS and RESET function.
RESET: There are two ways to reset the router to its factory defaults.
Method one: With the router powered on, use a pin to press and hold the
WPS/RESET RESET button until the Power LED starts flashing. And the router will reboot
to its factory default settings.
Method two: Restore the default setting from Backup & Restore of the router's
Web-based Management page.
Wi-Fi ON/OFF For turning on/off the Wi-Fi function..
SIM Card Slot For holding the SIM card.
Used for data sessions over LTE. Upright them for the best mobile Internet
Antennas
signal.
7