Table of Contents
Advertisement
Section 3 - On The Water
3.
VesselView displays a pop‑up screen warning. The operator must determine it is safe to turn the boat. If so, press the
"WAYPOINT SEQUENCE" button to acknowledge that it is safe for Axius Premier CAN Trackpad to automatically turn the
boat and maneuver to the new course.
4.
If the waypoint is not acknowledged, the boat continues on its current heading.
5.
At the end of the Track Waypoint course, input a new route or take control of the boat. Otherwise, the boat will revert to auto
heading mode and continues on its last course heading.
Waypoint Sequence
1.
Place the ERC lever or levers into forward. "WAYPOINT SEQUENCE" does not engage if the levers are in neutral or reverse.
2.
If the Track Waypoint button light is not on, press the "TRACK WAYPOINT" button.
3.
Press the "WAYPOINT SEQUENCE" button to engage Waypoint Sequence mode. The indicator light on the button will
illuminate.
a -
Indicator lamp
b -
"WAYPOINT SEQUENCE" button
Page 72
Pop-up screen warning
35575
31414
a
b
90-864197084 NOVEMBER 2008
Advertisement
Table of Contents
Troubleshooting
