Section 3 - On The Water
1.
Press the "TURN" button in the direction of the desired heading change. Each press of the button changes the desired heading
by 10°.
a -
Port "TURN" button
b -
Starboard "TURN" button
2.
Move (press) the joystick in the desired direction to make small adjustments in the chosen heading. Each recognized
movement adjusts the chosen heading by 1°.
NOTE: The joystick must move over 50% of its travel for the movement to be recognized as input.
To Resume a Heading
The "RESUME" button light is on if the previous course heading is available to resume.
IMPORTANT: The previous heading can only be resumed within one minute of Auto Heading being disengaged or if the boat has
not turned more than 180°.
Press the "RESUME" button to resume the previous heading if you:
•
Turned the steering wheel and disengaged Auto Heading.
Page 66
a
Adjusting heading to starboard
b
35567
24707
90-864197084 NOVEMBER 2008