Table of Contents
Advertisement
Section 3 - On The Water
Standby
•
In standby mode, the display shows a digital compass value and the angle of the drives when engaged.
•
The compass value is the actual current heading from the Axius CAN.
•
On the right side of the screen, an icon labeled "OFF" indicates that the Axius track pad is not engaged.
Standby and Active Lights
Axius Plus CAN Control Pad is disengaged (off) when the "STANDBY" light is illuminated. You must press a button to engage a
mode.
When the "ACTIVE" light is illuminated one mode of Axius is engaged (on).
a
STANDBY
TURN
RESUME
AUTO
HEADING
Power Icon
The power icon
indicates a button that engages or disengages an Axius Plus CAN Control Pad function indicated on the
button.
If you press a button that has the power icon
light illuminates.
If you press a button with the power icon
and the "ACTIVE" light illuminates.
STANDBY
TURN
RESUME
a
AUTO
HEADING
Auto Heading
1.
At least one engine must be running for auto heading to function.
Page 52
b
a -
b -
ACTIVE
TURN
32506
when that button light is on, the light turns off for that button and the "STANDBY"
when that button light is off, the light turns on for that button, a single beep sounds,
Button with power icon
a -
ACTIVE
b -
TURN
b
32507
"STANDBY" light
"ACTIVE" light
"AUTO HEADING" button
Power icon
90-864197084 NOVEMBER 2008
Advertisement
Table of Contents
Troubleshooting
