Table of Contents
Advertisement
Check drive chain tension
Important
Have chain tension adjusted by a Ducati Dealer
or Authorized Service Center.
Turn the rear wheel until you find the position where
chain is tightest. Set the vehicle on the side stand.
With just a finger, push down the chain at the point
of measurement and release.
Measure distance (A) between the center of the chain
pins and the aluminum section of the swingarm: it
must be A = 1.93 in (49 mm) 2.00 in (51 mm).
Important
This only applies to the motorcycle standard
settings, available upon delivery.
Important
Se la catena di trasmissione è troppo tesa o
troppo lenta, registrarla in modo che la misura rientri
nei valori indicati.
49÷51mm
1.93÷2in
A
Fig 147
227
Advertisement
Table of Contents
