Possible Faults; Technical Data - ATIKA HS 710/61 Original Instructions Manual

Possible faults

Fault
Hedge trimmer does not
work.
Hedge trimmer cuts with
interruptions
Motor is running, knives do
not move
Knives get hot
Motor is humming, knives
do not move

Technical Data

Type / Model
Year of construction
Motor output P
1
Mains voltage / Mains frequency
No-load speed n
0
Length of knives
Cutting length
Thickness of blade
Cutting distance
Adjustment of handhold
Hand-arm vibration front according to EN 1033/DIN 45675
Hand-arm vibration rear according to EN 1033/DIN 45675
Sound power level L (according to regulation 2000/14/EC)
WA
Sound pressure level L (according to regulation 2000/14/EC)
PA
Weight
Protection class
Possible cause
• No power
• Power failure
• Extension cable defect
• Safety fuse defect
• Motor or switch defect
• Cable defect
• Internal failure
• Circuit closer/breaker defect
• Internal failure
• Knives are edgeless
• Knives are defect
• Missing lubrication ⇒ friction
• Knives are blocking
Removal (disconnect power plug)
• Check cable, no longer use defect cable protection
• Check cable, no longer use defect cable protection
Check power supply, power outlet, fuse
•
• Replace fuse
• Have motor or switch checked by an approved
electrician or replaced by original spare parts
• Check cable, no longer use defect cable protection
• Manufacturer or responsible customer service
respectively must be called
• Manufacturer or responsible customer service
respectively must be called
• Manufacturer or responsible customer service
respectively must be called
• Arrange sharpening of knives
• Exchange knives
• Lubricating of knives
• Remove object
HS 710/61
see last page
710 W
230 V~ / 50 Hz
1600 min
–1
610 mm
534 mm
1.8 mm
22 mm
± 90° (180°)
a = 3.781m/s²; K = 1.5 m/s²
h
a = 3.991m/s²; K = 1.5 m/s²
h
measured sound power level 98.25 dB (A)
guaranteed sound power level 101.17 dB (A)
78.28 dB (A); K = 2.89 dB (A)
approx. 4.2 kg
II
19
K = 2.89 dB (A)