Storage; Guarantee; Possible Faults - ATIKA HA 500/51 Original Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 14
Cleaning
Clean the machine and its accessories thoroughly after
each application so that the faultless function is kept.
Clean the case with a soft brush or a dry cloth.
Water, solvents and polishing agents shall not be
applied.
Clean the cutting device on a regular basis using a brush or
a cloth.
Never clean the knives with water
Risk of corrosion!
Oil the cutting tools regularly. Never use any grease
Use environmentally friendly oil.
Keep handles dry and free of oils and grease.
Fault
Hedge trimmer does not work.
Hedge
trimmer
cuts
interruptions
Motor is running, knives do not
move
Knives get hot
Motor is humming, knives do not
move
Possible cause
• No power
• Power failure
• Extension cable defect
• Safety fuse defect
• Motor or switch defect
with
• Cable defect
• Internal failure
• Circuit closer/breaker defect
• Internal failure
• Knives are edgeless
• Knives are defect
• Missing lubrication => friction
• Knives are blocking
 Store unused equipment in a dry, locked place out of the
reach of children.
 To extend the service life of the hedge trimmer and
guarantee smooth operation, before storing for a longer
period
− thoroughly clean the hedge trimmer
− treat all movable parts with an environmentally friendly
oil
Never use any grease!
Push the knife protection on the knife.
Please observe the enclosed terms of guarantee.

Possible faults

Storage

Remove the mains plug from the socket.

Guarantee

Removal (disconnect power plug)
• Check cable, no longer use defect cable
protection
• Check cable, no longer use defect cable
protection
• Check power supply, power outlet, fuse
• Replace fuse
• Have motor or switch checked by an
approved electrician or replaced by original
spare parts
• Check cable, no longer use defect cable
protection
• Manufacturer
or
responsible
service respectively must be called
• Manufacturer
or
responsible
service respectively must be called
• Manufacturer
or
responsible
service respectively must be called
• Arrange sharpening of knives
• Exchange knives
• Lubricating of knives
• Remove object
customer
customer
customer
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ha 620/55Ha 710/61

Table of Contents